日本海側にアカモクは流れ着くのでしょうか?

2023/02/14 ブログ

 今、韓国の済州島に海藻のアカモクが大量に押し寄せています。このアカモクの大発生は、中国の東部の海岸が由来とされています。済州島には元々アカモクが流れ着いていました。2019年に済州島に流れ着いたアカモクは、860トンでしたが、2021年9750トンでした。そのため、済州島が非常に生臭くなったそうです。流れ着いたアカモクは回収され、そのおよそ9割は肥料として利用されました。韓国ではアカモクを食べる風習は無いようです。

アカモクの大量漂着は、中国の「海の森」造成計画が原因でした。

 韓国の国立水産科学院は、2015年当時に流入したアカモクの遺伝子を分析した結果、東シナ海沿岸で発生したものと一致することを確認しました。この時期を前後して、中国は海洋経済発展を目的として、海の森造成と生態環境復元を行うために、アカモクを大量移植する作業をしました。その目的自体、悪い物とは思えませんが、周辺諸国への影響を計算しなかった点に落ち度があります。特に海藻の場合、お互いに絡み合って、なかなか拡散しません。海藻を食べる魚も多いのですが、成熟した海藻は非常に硬くなる場合もあり、全てが魚に食べられることはありません。今後、日本の海岸にも大量に漂着する危険があります。

アカモク大量漂着の影響

 日本では、アカモクを食べることがありますが、その処理は結構大変な作業になります。人手不足の漁業では、到底処理できるとは考えられません。そのまま、海岸に放置されることになるでしょう。すると、当初は生臭く、腐敗後はさらに強い悪臭を放つことになります。また、アカモクは養殖場の網や施設に付着して漁業活動に支障を与えます。さらにアカモクは、秋から冬に生長し、4-7mの長さに達します。長く絡んだアカモクは、船舶のスクリューに巻き込まれて漁業関係者や船を利用する観光客の安全まで脅かすことになるでしょう。日本としても、事前に何らかの準備は必要かもしれません。

水中ドローンのスクリューに海藻が絡んだ時の対処法

 アカモクのみならず、多くの海藻が海を漂っています。その結果、海藻が水中ドローンのスクリューに絡みつくことが、稀に起こります。スクリューが小さい、CCROVではあまり海藻を巻き込みません。また、PowerRayもまた、スクリューの前後にガードがあり、海藻を巻き込むことは滅多にありません。一方、FIFISH V6のスクリューが大きく、浮遊物が巻き込まれることが多いです。海藻がスクリューに絡んだ時は、水中ドローンの制御に支障が出てきます。水中ドローン本体を右や左に旋回させるとき、通常時より動きが鈍い場合、スクリューに何かが絡んでいると予想できます。直ちに航行を中止し、ケーブルを手繰り寄せて、水中ドローン本体を回収しましょう。スクリューに絡んだ海藻は、釣り糸などより簡単に取り除けることが多いです。ただ海藻は切れやすいので、スクリュー中心部に絡んだままの場合もあります。その時は、スクリューを取り外して、海藻を取り除きましょう。

#アカモク #大量発生 #水中ドローン

Will red moku be washed ashore on the Sea of Japan side?

 Now, a large amount of seaweed Akamoku is rushing to Jeju Island in South Korea. This outbreak of red moxa is believed to have originated from the eastern coast of China. Originally, red moss washed ashore on Jeju Island. In 2019, 860 tons of red mok was washed ashore on Jeju Island, but in 2021, it was 9,750 tons. As a result, Jeju Island is said to have become very fishy. The washed-up Akamoku was collected, and about 90% of it was used as fertilizer. It seems that there is no custom of eating Akamoku in Korea.

A large amount of red moku has washed ashore due to China's "Sea Forest" construction plan.

 South Korea's National Institute of Fisheries Science analyzed the genes of red moku that flowed in in 2015 and confirmed that it matches the one that occurred along the coast of the East China Sea. Around this time, China carried out mass transplantation of red moxa in order to create sea forests and restore the ecological environment with the aim of developing the marine economy. I don't think its purpose is bad per se, but it's fault that it didn't take into account the impact on neighboring countries. Especially in the case of seaweed, it is difficult to spread because it is entangled with each other. Many fish eat seaweed, but mature seaweed can become very hard and not all eaten by fish. In the future, there is a danger that large amounts will wash ashore on the coasts of Japan.

Effects of large amounts of red osmanthus drifting ashore

 In Japan, akamoku is sometimes eaten, but processing it is quite a lot of work. In a fishery with a shortage of manpower, it is not thought that it can be processed at all. It will be left on the coast as it is. Then, it will smell fishy at first, and will emit an even stronger stench after rotting. In addition, red moku attaches to the nets and facilities of fish farms and interferes with fishing activities. In addition, Akamoku grows from autumn to winter and reaches a length of 4-7m. Long-entwined red moku will get caught in the propeller of the ship and threaten the safety of fishermen and tourists who use the ship. Japan may need to make some preparations in advance.

What to do when seaweed is entangled in the screw of an underwater drone

 Not only Akamoku, but also many seaweeds are drifting in the sea. As a result, it rarely happens that seaweed gets entangled in the screws of underwater drones. CCROV, which has a small screw, does not involve much seaweed. PowerRay also has guards in front and behind the screw, so seaweed rarely gets caught. On the other hand, the screw of FIFISH V6 is large and floating objects are often caught. When seaweed gets entangled in the screw, it interferes with the control of the underwater drone. When turning the underwater drone body to the right or left, if the movement is slower than usual, it can be expected that something is entangled in the screw. Immediately stop sailing, pull the cable and retrieve the underwater drone body. Seaweed entangled in screws is often easier to remove than fishing line. However, since seaweed is easy to cut, it may remain entangled in the center of the screw. At that time, remove the screw and remove the seaweed.

#Akamoku #LargeOutbreak #UnderwaterDrone